Address: 6951 Mc Divitt Dr, Bakersfield, CA 93313, USA
“ZJ bumper/carrier: I'd been looking at this bumper/carrier for several years. It's the most aesthetic ZJ bumper I've ever seen--either aftermarket or home-built. Nothing else matches the ZJ lines. My only concern was towing capacity (and shipping to AK). After contacting me about a minor snafu between Amazon's shipping price and the actual cost, the owner worked a solution that didn't cost me anything extra, and shipped it on time. AND it arrived early, approximately 6 weeks after ordering. It was packed EXTREMELY well, and arrived without a blemish. After seeing it in real life, I also had zero concerns about the actual towing capacity; there's enough steel that it should exceed Class III standards if empirically tested. (Hanson confirmed it was not tested to failure; it's rated Class II to be extremely conservative. I have no doubt that the subframe will tear out before the bumper fails.) I had the following minor installation issues: - The ends of the frame horns were a hair too close; just enough that I had to grind 1/8" off the inside of each one. It wasn't a big deal to hit it with a grinder, and the bumper slid in easily. Hanson is investigating their jig to see why mine was slightly off. - I had to ream out the holes in the unibody where the frame horns meet the factory subframe holes. Hanson is likely going to add this as an installation instruction. - A bolt on each side, where the exterior bracket bolts directly to the bumper, had minor interference with a welded internal support. The actual holes still lined up and the bolts went through. I am sending Hanson some pics. - Most of the hardware was 1/4"-1/2" to short, so I spent $14 at Lowes. - The tailgate opening radius needed slight trimming to avoid the tailgate. - Hanson recently stopped including the factory trailer wiring hole, but I didn't know I could special-request it. I used a 2" hole saw and four self-tapping screws. - Hanson forgot a plastic cap end-cap for the top of the tire carrier. After calling to let them know about the minor issues, they offered to send it, but I wanted (and already had) welded bar stock on top to provide antenna mounting locations. Even with the minor issues, the craftsmanship and attention to detail in the subtle angles along the sides and back still make this the most striking bumper on the market, and I have zero regrets about my experience. Installation just took me a couple more hours than anticipated. I haven't even had it installed for 24 hours and already received numerous compliments on it. The greasable poly bushing (double-shear!) means rebuilding it will be easy when it eventually wears out, and the latch is a door-style that "pops" the carrier open with one finger, and closes securely by just pushing it closed rather than needing a lever, which makes my wife happy when she needs the back for the dog or has her hands full with groceries. The carrier closes securely with a satisfying "click," and does not rattle whatsoever. After doing the bumper, I'm already considering the matching skid plate from PureJeep. Seriously, this bumper will outlast the unibody. The fitment issues don't take away from the rest of the bumper's details, angles, subtleties, strength, and ease of opening/closing, which is why it still gets 5 stars. You can find cheaper options, but the price for what you get still makes the Hanson bumper the best value.”
Address: 7100 Mc Divitt Dr, Bakersfield, CA 93313, USA
“Excellent communication with driver. He was super professional and courteous. Delivery was right on time. Definatly will use again.”
Address: 6851 Mc Divitt Dr, Bakersfield, CA 93313, USA
“I wanted to give my 88 year old father in law a military ballcap with his name and former rank for last Christmas, but this ended up being very last minute. The busy staff somehow squeezed me in and stitched the patch in time for me to iron it on and present it for Christmas. The staff were very friendly and are very supportive of our military. I highly recommend Wicked Stitch'z.”
Address: 6901 Mc Divitt Dr suite b, Bakersfield, CA 93313, USA
Address: 6951 Mc Divitt Dr, Bakersfield, CA 93313, USA
“Purchased a 3” suspension lift for a 2017 Nissan Armada. While the shipping date was pushed back about three weeks from the original date, the product is great. I was able to install this with some help from a friend from a shop floor. The vehicle has maintained its luxury ride while looking fantastic! I will buy another if the application fits.”
Address: 6951 Mc Divitt Dr, Bakersfield, CA 93313, USA
“Very happy with coil over swap on my 2002 7.3. Rides so much better. Wish I had done it earlier. Steve and everyone at FT is top notch. Always there to answer my questions. Steve did follow up after I got home. Now over 800 miles on my truck and still amazed at how well it drives. Thanks Steve and Randy for all the info and willing to take my truck in. Good people.”
Address: 6601 Mc Divitt Dr, Bakersfield, CA 93313, USA
1 million customers
find businesses on BusinessYab every month.
500 businesses
join BusinessYab every day.
BusinessYab helps you…